WEATHER STRIP SEAL
A seal is essential to properly soundproof a door. Our soundproofing seal is a rubber loop, carefully cut to your door width size, modified by us with sealed ends for added performance in creating a dead air space within the loop. We’ll cut this to an exact fit for your door if you’ll give us the measurement of the width of the door.
You will also receive the screws to mount it to your door. Depending on if it’s metal, you’ll need to drill pilot holes, if wood you won’t. Usually, only a screwdriver and a few minutes is needed to install this very much needed attachment to block sound from coming from underneath your door.
Some notes about our “Soundproof Door Sweep”: (The part that should seal the door bottom against sound and that fits on the edge of the bottom of the door). Since our doorsweep only seals up to a 3/4′ gap, a transom seal should be used from the hardware store that fits on the floor across the bottom of the doorway. Use this kind if you have a huge gap. Try to get one with a rubber flap. (Mechanical ones are expensive and will eventually fail).
Note, the illustration above would tend to make some believe the seal fits somewhat under the bottom of the door- not so- it just hangs down and does not slide under the door!
没有评论:
发表评论